Users Manual

153
The battery must be fully charged the first time you use the Transmitter, which
may take up to 2 hours. It is recommended to recharge the Transmitter after
each Sensor session. If a Transmitter is stored for two months, you must fully
charge the Transmitter battery to ensure it works properly.
The indicator light will flash when the Transmitter is being charged, and go off
when the Transmitter is fully charged.
Note: We recommend that your Transmitter is only charged by an intended and
qualified operator.
6.2.4 Add the Transmitter SN
Any time when you switch to a new Transmitter and/or a PDM you must add
the Transmitter SN.
Main Menu➔Sensor➔Transmitter SN
1. Tap Connect Sensor if you have set the Transmitter SN.
Note: Don’t forget to update the SN if you change to a new Transmitter.
Note: You can only change the Transmitter SN when there is no Sensor
connected.
You can find the Transmitter SN on the product box or on the back of the
Transmitter.
B ureau Veritas