Users Manual

160
6.2.5.7 Insert the Sensor
Hold the inserter as shown below and press the two buttons at the same time.
You might feel a slight pinch as the Sensor is placed just under your skin.
6.2.5.8 Remove the Inserter
Pinch and hold the ribbed release tabs on the sides of the Sensor support mount
with one hand, twist the inserter about 40° in the direction (anticlockwise)
shown with the other hand, until the orange triangle marked on the inserter
lines up with the orange line on the Sensor support mount, and then lift the
inserter vertically away from the mount. Only the Sensor support mount will be
left on your body.
B ureau Veritas