Users Manual

164
Note:
If you want to remove a Sensor before its expiration, disconnect it from your
PDM first before you connect a new Sensor. When you connect a new Sensor
directly, a “SENSOR RECONNECTED” message will appear on your PDM.
6.3 Calibrate Your Sensor
Each time the PDM prompts you with the message “METER BG NOW” or
“SENSOR CAL REMINDER”, you must enter a BG measurement to calibrate your
Sensor.
Go to the Sensor Calibration screen.
Main Menu➔Sensor➔Sensor Calibration
B ureau Veritas