Users Manual

210
PDM Message Priority Reason Actions to Take
LOST SENSOR
Move PDM close to
Transmitter.
The PDM has
not received a
signal from the
Transmitter for
10 minutes.
Tap to clear it.
Move PDM close to
Transmitter.
If Alert Silence is turned on, the PDM gives no beep or vibration when an alert
occurs. The ALERT SILENCE message will be displayed on your PDM screen
instead, and you can check the alert in Sensor alert history. See Chapter “How
to use CGM system” for more information.
PDM Message Priority Reason Actions to Take
ALERT SILENCE
Alerts have
occurred. Check
Sensor history.
Sensor alerts have
occurred during
silence mode.
Tap to clear it.
Check the Sensor
Alert History.
Take action based
on the alert
occurred.
Note:
If the Audio is on and the Alert Silence is off, the audio off icon will not appear
in the top right corner of this screen.
If the Audio and Alert Silence are on, the temporary audio off icon” ”will
appear in the top right corner of this screen.
B ureau Veritas