AIR Bluetooth Wireless Audio Transmitter for AirPods ® and Other Headphones SETUP GUIDE Scan QR code or enter the URL below into your web browser: MEEaudio.
Product Overview 3.5 MM AUDIO CONNECTOR HEADPHONE INDICATOR LIGHTS Plug into an in-flight entertainment system or other 3.
Getting Started To pair the Connect Air with your device, put them in pairing mode simultaneously. Once they are both in pairing mode, they will pair and connect. Once connected, the Connect Air indicator light will turn blue.
Connecting to Audio Source 3.5 MM AUDIO CONNECTOR Plug the Connect Air into an in-flight entertainment system or any other 3.5 mm audio source Increase volume on the entertainment system if necessary, then use volume controls on your headphones (if available) to adjust volume.
Troubleshooting Most issues can be solved by powering the Connect Air off and then back on. When reconnecting a set of previously-paired headphones, power on the headphones first, then power on the Connect Air. FACTORY RESET A factory reset can be used to delete all previous Bluetooth pairings from memory. To perform a factory reset, make sure the Connect Air is powered on, then press the multifunction button 6 times until both blue lights flash momentarily.
FOR ADDITIONAL SUPPORT VIEW OUR VIDEO SETUP GUIDE Scan QR code or enter the URL below into your web browser: MEEaudio.com/CA1Vid QUESTIONS? WE’RE HERE TO HELP! Phone Support: 626-965-1008 Monday ~ Friday 9:00 am to 5:00 pm PST Email Support: support@MEEaudio.com All emails are responded to within 2 business days POWERED BY MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
WARRANTY MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, contact your local MEE audio dealer or visit MEEaudio.com/Support COMPLIANCE INFORMATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NEED HELP? VIEW OUR VIDEO SETUP GUIDE Scan QR code or enter the URL below into your web browser: MEEaudio.
