User Manual

FACTORY RESET
A factory reset can be used to delete all
previous Bluetooth pairings from memory.
To perform a factory
reset, make sure the
Connect Air is powered
on, then press the
multifunction button
6 times until both blue
lights flash momentarily.
The Connect Air will then
go into pairing mode, as
indicated by the red and
blue flashing lights.
All previously paired
devices will be cleared from
memory and a new pairing
will need to be created.
Most issues can be solved by powering the
Connect Air off and then back on. When
reconnecting a set of previously-paired
headphones, power on the headphones first,
then power on the Connect Air.
Troubleshooting
PRESS
6x