A IRHOOKS OPEN EAR WIRELESS SPORTS HEADPHONES SETUP GUIDE Scan QR code or visit: MEEaudio.com/AirHooksSupport WARNING: Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
GETTING STARTED Package Contents AirHooks Open Ear Headphones USB Charging Cable
HOW TO WEAR
FUNCTIONALITY & CONTROLS Basic remote operation with mobile devices: Function Operation Power On Press and hold for 3 secs Power Off Press and hold for 5 secs Volume Up Double-press Volume Down Triple-press Play / Pause Single press Answer / End Call Single press Mute / Unmute Call Press and hold for 2 secs Reject Call Double-press Activate Siri® / Google Assistant™ / Voice Command Press and hold for 2 secs.
PAIRING The AirHooks will automatically enter pairing mode when powered on for the first time. To power on, press and hold the power button for 3 seconds. Pairing mode is indicated by the “Pairing” voice prompt and flashing alternating white and green light.
PAIRING 12:26 PM AT&T LTE Settings 95% Bluetooth Bluetooth MEE audio AirHooks Open the Bluetooth menu on your device and select “MEE audio AirHooks”. Once pairing is complete, the indicator light will stop flashing and you will hear the “Connected” voice prompt.
SUBSEQUENT USE When powered on, the AirHooks will automatically reconnect to the last paired Bluetooth device and you will hear the “Connected” voice prompt. To reconnect manually, open the Bluetooth menu on your device and select “MEE audio AirHooks” from the Bluetooth device list. PAIRING ANOTHER DEVICE To pair the AirHooks to a new Bluetooth device, first unpair the AirHooks from your original device using its Bluetooth menu or turn off Bluetooth functionality on the original device.
FACTORY RESET A factory reset can be used to restore all features to their factory settings and delete all previous Bluetooth pairings from memory. 1. Power off the AirHooks by holding down the button for 5 seconds. 2. While powered off, press and hold the button for 10 seconds until you hear two tones, followed by the voice prompt “Disconnected”. Once the reset is complete, the AirHooks will automatically enter pairing mode.
FOR ADDITIONAL SUPPORT VIEW OUR VIDEO SETUP GUIDE Scan QR code or enter the URL below into your web browser: MEEaudio.com/AirHooksSupport QUESTIONS? WE’RE HERE TO HELP! Phone Support: 626-965-1008 Monday ~ Friday 9:00 am to 5:00 pm PST Email Support: support@MEEaudio.com All emails are responded to within 2 business days MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
ADDITIONAL INFORMATION COMPLIANCE INFORMATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RULES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
