User Manual

9
MULTIPOINT
Multipoint Pairing
Multipoint allows two Bluetooth devices to be connected to the X7
simultaneously. Both devices will need to be paired before multipoint can
be used.
To use two Bluetooth devices with the X7, first pair them by following the
pairing procedure described in the Pairing with Bluetooth devices section for
each device and then turn off the headset.
When powered on again, the X7 will automatically attempt to connect to the
2 most recently-paired devices, as long as they have Bluetooth enabled and
are within range. If a device that has already been paired does not connect
automatically, select “MEE audio X7” from the Bluetooth menu of the device.
If you no longer wish to connect to multiple devices, disable Bluetooth on the
device you do not want connected to the X7 or remove the “MEE audio X7”
pairing from the Bluetooth menu of the device.
Multipoint Functionality
Status Function Operation
Media
playing on
one device
Play media on other
device
Pause audio playback on the
active device and start audio
playback on the other connected
device*
*It may take up to 60 seconds for audio to switch
Incoming calls will always take precedence over media. If media is playing
on one device and an incoming call is received on the other device, the X7
will pause the media on the active device and activate the device with the
incoming call. Once the call has ended, the X7 will reactivate the original
device and resume playback (with most media applications).