BLUETOOTH WIRELESS SPORTS IN-EAR HEADPHONES ® USER MANUAL model: X7Plus BEFORE FIRST USE WATCH THE HOW TO WEAR FIT VIDEO at: https://goo.gl/Cl9n7J Please read this manual in its entirety to ensure best fit and sound.
EN PACKAGE CONTENTS Stereo Bluetooth Wireless Sports In-Ear Headphones 1 Carrying case Micro-USB charging cable User manual 3 pairs of eartips
PRODUCT OVERVIEW EN Stereo Bluetooth Wireless Sports In-Ear Headphones 3 4 5 1 2 6 Remote 1 Micro-USB charging port 2 Status indicator light 3 4 5 6 Volume up/skip track button Microphone Multifunction button Volume down/previous track button 2
CHARGING *** You must completely charge the headset before the first use *** Connect the Micro-USB charging cable to any powered USB port and to the charging port of the X7 Plus, which is located underneath a cover on the remote. Charge time is approximately 2 hours. The status indicator light on the right earpiece will stay red while the headset is charging and turn blue once it is charged and ready for use. When the battery is low, the headset will say “battery low”.
FIRST USE: SELECTING EARTIPS The X7 Plus is an in-ear earphone and relies on a tight seal between the eartips and your ear canals to deliver good bass response and overall sound quality. Three sizes of ear tips are included to help you achieve the best fit. We recommend trying all three sizes and selecting the ones with the best sound and comfort for your ears.
FIRST USE: SELECTING EARTIPS (Continued) Installing Eartips (Continued) STEP 2. Push the inner tube of the eartip onto the earphone nozzle at an angle and work onto the nozzle. STEP 3. Once on the nozzle, straighten the eartip out and push until the bottom of the eartip is flush against the base of the earphone nozzle (this will push the nozzle through the front of the eartip). STEP 4. Gently pull the eartip back to desired position. Check to make sure it is installed securely.
WEARING THE X7 PLUS The X7 Plus features an over-the-ear fit with a flexible “memory wire” section located near the earpieces. Wearing the earphones correctly will ensure the most comfortable and secure fit: 1. Identify the right and left earpieces. MEMORY WIRE RIGHT EARPIECE LEFT EARPIECE 2. Place the cable behind your neck and put the earphones in your ears.
WEARING THE X7 PLUS (Continued) 3. Adjust each earpiece until it fits flush in your ear and the eartip seals in the ear canal. 4. Bend the memory wire around your ears to achieve a conforming fit.
WEARING THE X7 PLUS (Continued) 5. Tighten the sliding cable cinch to fix the earphones in place for the most secure fit cable cinch CORRECT FIT: Cable over-the-ear and earphones flush in the ear. USE WHILE EXERCISING The X7 Plus is ideal for exercise as the over-the-ear fit will keep it in place during just about any activity. Tighten the cable cinch behind your neck to make the fit even more secure.
PAIRING WITH BLUETOOTH DEVICES *** Your headset must be paired to a Bluetooth device before it can be used. It is only necessary to pair your headset once with each device. *** 1. Make sure the X7 Plus is turned off and within 1 meter of your device. Press and hold the Multifunction button for about 5 seconds until you hear the headset say “Pairing”. The status indicator light will flash red and blue in an alternating pattern while the X7 Plus is in pairing mode.
CONNECTING TO PAIRED DEVICES Once the X7 Plus is turned on, it will automatically connect with the last paired Bluetooth device that is on and within range. If the X7 Plus is not connected automatically, tap the Multifunction button to initiate connection with last paired device. If the headset still does not connect, open the Bluetooth menu on your device and select “X7 Plus” from the Bluetooth device list. Note: Device must be set to allow automatic connections.
CONTROLS (Continued) Controlling Phone Calls (continued) Status Function Call in progress, second incoming call One call active, one on hold * Operation Hang up current call and Press the Multifunction button answer new call Place current call on hold Press and hold the Multifunction and answer new call button for 2 seconds Switch active calls Press and hold the Multifunction button for 2 seconds End current call and switch to call on hold Press the Multifunction button If you answer a call from y
MULTIPOINT Multipoint Pairing Multipoint allows two Bluetooth devices to be connected to the X7 Plus simultaneously. Both devices will need to be paired before multipoint can be used. To use two Bluetooth devices with the X7 Plus, first pair them by following the pairing procedure described in the Pairing with Bluetooth devices section for each device and then turn off the headset.
LED INDICATOR LIGHTS The status indicator light of the X7 Plus is located on the remote.
SAFETY AND CARE • When not in use, power the headset off and store in the included protective carrying case. • Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight. • There are no user replaceable/reparable parts in the headset. Disassembling it will void your warranty. • If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried.
WARNING Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
www.MEEaudio.com support@MEEaudio.