User Manual

10
CONNECTING TO PAIRED DEVICES
Once the X7 Plus is turned on, it will automatically connect with the last paired
Bluetooth device that is on and within range. If the X7 Plus is not connected
automatically, tap the Multifunction button to initiate connection with last
paired device. If the headset still does not connect, open the Bluetooth menu
on your device and select “X7 Plus” from the Bluetooth device list.
Note: Device must be set to allow automatic connections.
On some computers, Bluetooth audio must be enabled manually every time
you connect.
CONTROLS
The X7 Plus can control media and phone calls from a smartphone or tablet.
Adjusting Volume
Function Operation Notes
Increase volume Short press the Volume up ( ) button
Headset will produce
a tone when volume
reaches the minimum
or maximum level.
Decrease volume Short press the Volume down ( - ) button
Note: volume adjustments made while playing media will change the volume of the headset inde-
pendently of the connected device. Raise or lower device volume as needed to further increase or
decrease the overall volume. Some newer devices use AVRCP 1.3 Bluetooth Profile, which will allow the
X7 Plus to control the device volume directly.
Controlling Phone Calls
Status Function Operation
Incoming call
Answer call Press the Multifunction button
Reject call
Press and hold the Multifunction
button for 2 seconds
Call in progress
End call Press the Multifunction button
Mute/Un-Mute call
Press and hold the Volume Down
( - ) button for 2 seconds
Transfer call to headset
Press and hold the Volume Up ( )
button for 2 seconds
Call in progress,
phone handset active*
Transfer call to headset
Press and hold the Volume Up ( )
button for 2 seconds
continued on next page