User Manual

MULTIPOINT
Multipoint Pairing
Multipoint allows two Bluetooth devices to be connected to the X7 Plus simul-
taneously. Both devices will need to be paired before multipoint can be used.
To use two Bluetooth devices with the X7 Plus, first pair them by following the
pairing procedure described in the Pairing with Bluetooth devices section for
each device and then turn off the headset.
When turned on again, the X7 Plus will automatically attempt to connect to the
2 most recently-paired devices, as long as they have Bluetooth enabled and
are within range. If a device that has already been paired does not connect
automatically, select “X7 Plus” from the Bluetooth menu of the device.
If you no longer wish to connect to multiple devices, disable Bluetooth on
the device you do not want connected to the X7 Plus or remove the “X7 Plus”
pairing from the Bluetooth menu of the device.
Multipoint Functionality
Status Function Operation
Media playing
on one device
Play media on other device
Pause audio playback on the active
device and start audio playback on the
other connected device*
*It may take up to 60 seconds for audio to switch
Incoming calls will always take precedence over media. If media is playing on
one device and an incoming call is received on the other device, the X7 Plus
will pause the media on the active device and activate the device with the
incoming call. Once the call has ended, the X7 Plus will reactivate the original
device and resume playback (with most media applications).
For phone call controls, see the Controlling Phone Calls section.
12