User manual

CHARGING

*** You must completely charge the headphone before the first use ***

Connect the USB charging cable to any powered USB port and to the 3.5mm

jack on the right earcup. Make sure it is plugged in fully. Charge time is

typically 2-3 hours.

The red LED light will stay lit while the headphones are charging and will blink

or turn off completely when the headphones are ready for use. A blinking red

LED light indicates a trickle charge mode, whereby the battery is charged

almost fully and the headphones are maintaining their current charge level.

Note: the Runaway cannot be turned on or used while charging.

INDICATOR LIGHT STATE WHEN CHARGING CABLE IS PLUGGED IN:

LIGHT PATTERN STATUS NOTES

Solid red light Battery charging Allow to charge for 2-3 hours

Blinking red light Trickle charge Ready for use

All lights off Battery full Ready for use

When the battery is low, the headphones will say “Battery low” every

60 seconds and the red light will flash three times every three seconds.

Apple devices such as the iPhone®, iPad®, and iPod® Touch will display a

headphone battery indicator when the Runaway is connected.