User guide

CONNECTING TO PAIRED DEVICES

*** The Matrix must have been previously paired

with your device before you can connect ***

When the Matrix is turned on and not in pairing mode, it should connect to the

last connected device automatically. If the last connected device discoverable,

the Matrix will connect to other paired devices in the order of last connection.

If the Matrix does not connect and remains in standby mode, a short press

of the Play/Pause button will connect to the last connected device with

Bluetooth on and within range.

Note: On some PC and Mac computers you will need to manually enable

Bluetooth audio every time you connect

USING THE MATRIX HEADPHONES

Adjusting Volume

Note: In standby mode and while playing media with most devices, volume

adjustments will only change the volume of the Matrix. Adjust device volume

as needed to further increase or decrease the volume. During a phone call the

Matrix will control device volume. Some newer devices use AVRCP 1.3 Bluetooth

Profile, which will allow the Matrix to change the device volume at all times.

Function

Increase

volume

Decrease

volume

Operation

Single press or press and hold the

Volume Up button

Single press or press and hold the

Volume Down button

Notes

When the volume reaches the

minimum or maximum level the

Matrix will produce a short tone.

PAIRING WITH BLUETOOTH DEVICES USING NFC

Note: When the volume reaches the minimum or maximum level there will

be two short tones.

Put the Matrix in pairing mode

Place the NFC-compatible device against the left ear cup of the Matrix until

pairing is complete.

A dialog box should automatically appear; if the dialog box does not

appear, re-position the device until it does

Follow the instructions on the screen to pair the device with the Matrix