NS63 Active Noise Canceling Headphones with Headset Functionality
Congratulations, and thank you for choosing the MEElectronics NoiseSHIELD NS63 Active Noise Canceling Headphones Please read this manual in its entirety and visit meelec.com/manual for additional information and troubleshooting If you have any questions or issues after reading the manual, please contact MEElectronics customer service at customerservice@meelec.
Package Contents Warning NoiseSHIELD NC63 Features Putting Batteries in the NC63 Listening to Music/Audio Noise Canceling Only Use When Not in Use Headset Use Headset Use: Controlling Volume Headset Use: Taking Phone Calls Microphone and Remote Use Warranty Troubleshooting Specifications 1 2 3 4 5 6 7 8 10 11 12 13 15
NS63 MUTE Active Noise Canceling Headphones Protective Case Headset Cable Audio Cable User Manual Note: An online version of this manual is available on meelec.
Warning Noise canceling headphones attenuate external low-pitched sounds. Be aware that when the active noise canceling feature is on auditory queues will sound different. Do not use headphones at high volumes for extended periods of time as doing so will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
NoiseSHIELD NS63 Features The NoiseSHIELD NS63 is a feature-rich high quality active noise canceling (ANC) headphone. • No batteries are necessary for the NoiseSHIELD NS63 to work, however two AAA batteries are required for the ANC function to work. • Equipped with a jack on the left ear cup for a detachable cable, the NoiseSHIELD NS63 works with any cable that has a standard 3.5mm plug. Both a standard audio cable and headset cable are included.
Putting Batteries in the NS63 THE NOISE CANCELING FUNCTION REQUIRES 2 AAA BATTERIES. BATTERIES NOT INCLUDED. 1. Remove the battery compartment lid on the right ear cup by sliding it in the direction of the arrow + OPEN + OPEN + + BATTERY BATTERY + BATTERY 2. Insert AAA batteries in the correct orientation as shown. 3. Replace the battery compartment lid and slide it the opposite direction of the arrow until it clicks in place BATTERY right ear cup + OPEN www.meelec.
Listening to Music/Audio MUTE power switch headphone jack power indicator left ear cup audio device audio cable headset cable 1. Connect either the audio cable or headset cable to the jack on the left ear cup, making certain the plug is firmly seated. If using the headset cable, orient it so that the microphone is closest to the headphones. 2. Connect the other end of the cable to the headphone jack of your audio device. 3.
Noise Canceling Only Use A. B. C. D. E. F. mute button ON position power switch headphone jack OFF position power indicator A MUTE B C E F D left ear cup 1. To activate noise canceling function, move the power switch on your headphones to the “ON” position; power indicator should light up green. There is no need to connect a cable to use the noise canceling function only; simply turn the headphones on and wear them. www.meelec.
When Not In Use • When not using your headphones, move the power switch to the “OFF” position. • Remove battery if you will not be using the noise-cancelling functionality of the headphones for an extended period of time (greater than one week). • Store the headphones in the included protective carrying case. • To clean the headphones, wipe with a clean, soft cloth. Do not use harsh chemical cleaners on the headphones.
Headset Use The included headset cable features an inline microphone, remote, and universal volume control. The headset cable is compatible with most smartphones and tablets. For full compatibility and functionality, including controlling media playback, please visit meelec.com/phone. universal volume control + remote button maximum volume setting microphone Maximum volume is located when the switch is closest to the + on the remote.
Headset Use (Cont.) Use the headset cable with smartphones.
Headset Use: Volume Control Important: Volume is controlled on the inline mic/remote unit. If you don’t hear any sound, or the volume is low, adjust the volume slider toward the + symbol on the remote.
Microphone and Remote Use: Controlling Media Note: iPhone and Android devices support multi-tasking, allowing one program to have priority over others, which can affect remote button functionality. If your remote button is not working, try bringing the program you want the remote to work with into focus (active window).
Warranty The NoiseSHIELD NS63 is covered by a 1 year manufacturer warranty against manufacturing defects. Cleaning your NS63 when necessary will extend the life of your headphone. For issues with your product, contact customerservice@meelec.com. Contact warranty@meelec.com for warranty claims from: • Within the US or Canada from an authorized reseller (see www.meelec.com/wheretobuy) • From www.meelec.com • From the MEElectronics store at Amazon.co.
Troubleshooting Problem Ambient noise is not reduced Solution Make sure the noise canceling function switch is in the ON position and the green light is lit; if the light is not lit, change the batteries Adjust the headphones to completely cover your ears Turn the power switch off and then on again to ensure synchronization of the noise canceling signal All outside sounds are not eliminated The NS63 reduces external noise by up to -18dB and no ANC headset on the market can completely eliminate outside
Troubleshooting Continued Problem During phone calls the person on the other end can’t hear me Solution Check to make sure you are using the headset cable, make sure the microphone/remote unit is closest to the headphones the microphone is close to your mouth Check the compatibility of your phone at meelec.com/phone Try unplugging the headset cable and plugging it back in to your phone If you are using a computer, you may need an adapter (Skype adapter on meelec.
Specifications Driver: 40 mm cobalt magnet dynamic driver Impedance: 32 ohms + 15% @ 1K 1mW Frequency response: Sensitivity: Active noice reduction: Power requirements Battery life 20 Hz to 20 KHz 108 dB 12 dB at 300 Hz 2 x 1.5V AAA battery Up to 32 hours with ANC active MEElectronics and its logo are registered trademarks of S2E, Inc. All rights reserved. iPod®, iPhone®, and iPad® are registered trademarks of Apple Inc. Android™ is a trademark of Google Inc.