SPORTS EARPHONES WITH MEMORY WIRE USER MANUAL IMPORTANT Please read this manual in its entirety to ensure best fit and sound. visit www.meelec.com/fit for fit tutorial videos and additional info.
CONFIGURING FOR YOUR EARS: EARTIPS Multiple sets of eartips are included to ensure you get the best fit with your Sport-Fi earphones. We recommend trying all of the included eartips. If you experience tinny sound or a lack of bass, try different eartips. The correct eartip for your ear will: • Allow the earphone to fit flush in the ear • Seal with your ear canal and reduce outside noise when inserted • Provide good bass response 1 2 3 4 Install eartips as shown.
CONFIGURING FOR YOUR EARS: memory wire Sport-Fi earphones feature an over-the-ear fit with a flexible “memory wire” section located near the earpieces. Using the memory wire correctly will ensure the most comfortable and secure fit. 1.1 Identify the right and left earpieces as indicated by the “L” and “R” markings. They are not interchangeable. 1.
2.1 Adjust each earpiece until it fits flush in the ear and the eartip seals in the ear 2.
3 While pulling the cable gently with one hand, squeeze the memory wire behind your ear with the other hand until the fit is tight and secure
CABLE CINCH SLIDE THE CABLE CINCH UP 4.1 Tighten the sliding cable cinch to fix the earphones in place for the most secure fit SHIRT CLIP HOLDS CABLE IN PLACE 4.
5 When worn correctly, the earphone sits flush in the ear and the cable is secure behind the ear
SUBSEQUENT USE After first use, the memory wire will retain its approximate shape for easier future installation.
2.1 Insert the earpieces into your ears and adjust until a seal is achieved 2.2 Squeeze the memory wire behind your ear until the fit is tight and secure. Use the cable cinch and shirt clip to control cable movement. Note: If you must remove and reinsert the earphones while working out, avoid getting sweat in the nozzle as this may lead to a temporary reduction/loss of sound.
MICROPHONE & REMOTE USE (M3P, M6P and S6P only) Sport-Fi headsets include an inline remote and microphone. Basic Remote Operation for iPhone® and most Android™ phones: Phone Mode Button Press Phone call in progress Single press Incoming call Single press Action Answer phone call End call Additional remote functions are available with Apple and Android devices. Visit meelec.com/phone for complete compatibility and functionality.
care and cleaning • Do not remove from ears or unplug by pulling on the cable. Always grasp the plastic part of the plug or earpieces • If necessary, clean the earphones with a small amount of hydrogen peroxide on a cotton swab. Swab only the outside of the earphone. Eartips can be removed and rinsed under running water or in hydrogen peroxide. Allow earphones and eartips to dry completely before resuming use.
www.meelec.
