Product Manual

Page 10
Cold Start Procedure (Gasoline Engine Units)
Warning: Do Not Operate Gasoline Engine
Units in an Enclosed Area
 Release any remaining tank pressure by slowly opening the
manual drain valve.
 Turn on the engine gasoline supply.
 Put the choke in the “On” position
 Close the service valve and put Unloader lever in the “unload”
(A) position for Honda engine driven models.
 Start the engine, release the choke, and allow the engine to
warm up for two to three minutes.
 Return the unloader lever to the “load” (B) position for Honda
driven models. As shown Below for the Manual head
Unloader

Note: Turn the gasoline supply off before shutting down
the compressor.