USER MANUAL Table of Contents Safety Information……………………………………...………………3 Specifications………………………………………...…………………4 Main Power Connection…………………………...…………………..6 DMX-512 Connection……………………………..…………………...6 Rigging the Fixture……………………………….…………………….7 Main Control Menu……………..…………………………………..….7 DMX Profile...................................................................................10 Cleaning & Maintenance...............................................................14 Parts List............................
Check that the unit has not been damaged during transport Protection Against Fire 1. 3. 4. 5. 6. Maintain a minimum of 1 foot distance from any type of flame. Replace fuse only with the specified type and rating. Do Not install the unit to close to a heat source. Make sure cable are properly secured away from unit movement. Maximum surface operating temperature 104º. Protection Against Fire 1. 2. 3. 4. Disconnect power before lamp replacement or servicing.
Specifications Part Numbers Fixture Lamp Flight Case 1130 - AXIS 7D5 LLUM75 –75W LED P-1130 DUALCASE Mechanical Specifications Pan: 540° Tilt: 270° DMX Connectors: 3-pin and 5-pin XLR connectors Thermal: Maximum ambient temperature 100° F Maximum surface temperature 130° F Fastening System: 2 Treaded M8 mounting positions 14 3/8 ” 12.75 ” 13.65 ” Fixture Packaged for Shipping Size: 13.10” x 9” x 17.75” Weight: 21.5 lb 13.30 ” Size: 21.25” x 17.25” x 11.75” Weight: 24 lb 4.
Color 1: Open 2: Red 3: Orange 4: Green 5: Light Blue 6: Purple 7: Yellow 8: Blue 9: Pink Gobo’s Rotating Gobo Wheel 1: Open 2: Gobo 1 3: Gobo 2 4: Gobo 3 5: Gobo 4 6: Gobo 5 7: Gobo 6 8: Gobo 7 (note) Gobo’s on the Axis 7D5 are not removable Prism Rotating 3 way Prism 5
Main Power Connection Caution! 1. 2. 3. Do not connect fixture to a dimmer system. This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating.
Rigging the fixture Caution! 1. The installations must be carried out by an authorized dealer or trained professional. 2. Unit may cause severe injures if you have doubts concerning the safety do not install. 3. Unit is to be 24inches away from flammable materials (decoration material) 4. Use high quality installation equipment to hang unit. When rigging a unit it is very important that you follow common safety procedures.
Run Mode DMX Address Channel Mode Invert Pan Invert Tilt Swap Pan-Tilt Encoder Pan-Tilt No DMX Signal Display Power Save Load Default DMX 001 15CH OFF OFF OFF ON KEEP OFF ► Channel Mode Run Mode DMX Address Channel Mode Invert Pan Invert Tilt Swap Pan-Tilt Encoder Pan-Tilt No DMX Signal Display Power Save Load Default DMX 001 15CH OFF OFF OFF ON KEEP OFF ► Invert Pan Run Mode DMX Address Channel Mode Invert Pan Invert Tilt Swap Pan-Tilt Encoder Pan-Tilt No DMX Signal Display Power Save Load Default D
Manual Control Press the ▲ or ▼to select the Manu then press the Enter button to Access the manual control functions 001 Set Manu Sys ►Manual 1. Pan 2. Pan Fine 3. Tilt 4. Tilt Fine 5. Pan-Tilt Time 6. Stop/Strobe 7. Dimmer 8. Color 9. Gobo Change 10. Gobo Rotation 11. Focus 12. Prism Insertion 13. Prism Rotation 14. Macro Function 15. Reset 16. Colour2 17. Color Time 18. DimPriFrost Time 19.
Axis 7D5 15 Ch Mode DMX Channel 1 2 3 4 5 Function Pan Pan Fine Tilt Tilt Fine Pan/Tilt Speed 6 Shutter 7 Dimmer 8 Color 9 Gobo Description Pan Course Pan Fine Tilt Course Tilt fine Pan Tilt Speed (Slow to Fast) Closed Strobe (slow to fast) Open Dimmer off to full Open White+Red Red Red+Orange Orange Orange+Green Green Green+Light Blue Light Blue Light Blue+Purple Purple Purple+Yellow Yellow Yellow+Blue Blue Blue+Pink Pink Pink+White Color Scroll (Slow to Fast) Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gob
10 Gobo Rotation 11 12 Focus Prism 13 Prism Rotation 14 Macros 15 Control Gobo Rotation Counter Clockwise Gobo Rotation (Fast to Slow) Clockwise Gobo Rotation (Slow to Fast) Gobo Shake (Slow to Fast) Focus No Function Prism Engage Prism Rotation Prism Shake (Fast to Slow) Prism Rotation Counter Clockwise (Fast to Slow) Prism Rotation Clockwise (Slow to Fast) No Function Macros No Function Motor Function Reset (hold for 5 seconds) Pan Tilt Reset (hold for 5 seconds) All Reset (hold for 5 seconds)
9 Gobo 10 Gobo Rotation 11 12 Focus Prism 13 Prism Rotation 14 Macros 15 Control 16 Color Effect Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Counter Clockwise Gobo scroll (Fast to Slow) Open Clockwise Gobo scroll (Fast to Slow) Gobo 1 Shake Gobo 2 Shake Gobo 3 Shake Gobo 4 Shake Gobo 5 Shake Gobo 6 Shake Gobo 7 Shake Gobo Rotation Counter Clockwise Gobo Rotation (Fast to Slow) Clockwise Gobo Rotation (Slow to Fast) Gobo Shake (Slow to Fast) Focus No Function Prism Engage Prism Rotati
16 Color Effect 17 18 19 Color Speed Dim/Pri Speed Gobo Speed Yellow Yellow+Blue Blue Blue+Pink Pink Pink+White White Red Orange Green Light Blue Purple Yellow Blue Pink White Color Wheel Rotation Speed (Fast to Slow) Dimmer / Prism Speed (Fast to Slow) Gobo Wheel Speed (Fast to Slow) 13 60-64 65-69 70-74 75-79 80-84 85-89 90-94 95-114 115-134 135-154 155-174 175-194 195-214 215-234 235-254 255 0-255 0-255 0-255
Cleaning and maintenance Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and electronics checked by an expert every 2 years. The following points have to be considered during the inspection: 1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded. 2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
Warranty Information Warranty Conditions -Unless otherwise stated in writing, your product is covered by a one year parts and labor limited warranty. -LEDs are not guaranteed to match in color temperature or output. -It is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and reseller or distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty period.
