USER MANUAL Table of Contents Safety Information……………………………………...………………3 Specifications………………………………………...…………………4 Main Power Connection…………………………...…………………..5 DMX-512 Connection……………………………..…………………...5 Rigging the Fixture……………………………….…………………….6 Main Control Menu……………..…………………………………..….6 DMX Profile.................................................................................... 8 Cleaning & Maintenance...............................................................13 Parts List...........................
Check that the unit has not been damaged during transport Protection Against Fire 1. 3. 4. 5. 6. Maintain a minimum of 1 foot distance from any type of flame. Replace fuse only with the specified type and rating. Do Not install the unit to close to a heat source. Make sure cable are properly secured away from unit movement. Maximum surface operating temperature 104º. Protection Against Fire 1. 2. 3. 4. Disconnect power before lamp replacement or servicing.
Specifications Part Numbers Fixture Lamp Flight Case 1125- AXIS QD7 LOSRAM–12W RGBWLED P-1125 DUALCASE Mechanical Specifications Pan: 540° Tilt: 270° DMX Connectors: 3-pin and 5-pin XLR connectors Thermal: Maximum ambient temperature 100° F Maximum surface temperature 130° F Fastening System: 1 Removable mount 10.5 ” 3.75 ” 9” Fixture Packaged for Shipping Size: 10.5” x 96.5 x 12.5” Weight: 12 lb 10.75 ” Size: 12.5” x 9” x 13.5” Weight: 13.5lb 3.5 ” 6.
Main Power Connection Caution! 1. 2. 3. Do not connect fixture to a dimmer system. This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating.
Rigging the fixture Caution! 1. The installations must be carried out by an authorized dealer or trained professional. 2. Unit may cause severe injures if you have doubts concerning the safety do not install. 3. Unit is to be 24inches away from flammable materials (decoration material) 4. Use high quality installation equipment to hang unit. When rigging a unit it is very important that you follow common safety procedures.
To set the desired operational channel mode press Enter. Use the ▲ or ▼ to select the desired DMX profile operational mode from 6,17 or 37 and press Enter to confirm your setting. >Chan Mod 17CH Note: Operational mode are located on Page 8 of the manual. >Tool DimmMod >PT Sett Xrevise >Control CH01 >Display 60S This function will give you access to the Display Control press Enter.
To adjust the white color balance Press Enter >RGBWhit WhitB >Info Version >Reset NO >WhiteSW on If you wish to fine-tune the white color balance press Enter select On or Off press Enter to confirm your setting. >WhitR 255 To fine adjust the Red press Enter. Use the ▲ or ▼ to select the desired maximum intensity of the Red LED, press Enter to confirm your setting. >WhitG 255 To fine adjust the Green press Enter.
Axis QD7 17 Ch Mode 2 DMX Channel 1 2 3 4 Function Pan Pan Fine Tilt Tilt Fine 5 Pan/Tilt Speed 6 7 8 9 LED Color LED Color LED Color LED Color 10 Shutter 11 12 Dimmer Color Fade 13 Color Preset 14 Strobe Macro Description Pan Course Pan Fine Tilt Course Tilt fine Fast Mid Slow Red Green Blue White Closed Strobe (slow to fast) Pulse (slow to fast) Random Strobe (slow to fast) Open Dimmer off to full Color Fade (slow to fast) No Function White 2700K White 3200K White 4300K White 5600K White 650
15 Macros 16 Macros Speed 17 Control No Function Color Chase Macro 1 Color Chase Macro 2 Color Chase Macro 3 Color Chase Macro 4 Color Chase Macro 5 Color Chase Macro 6 Color Chase Macro 7 Color Chase Macro 8 Macro Speed (slow to fast) No Function All Motor Reset Demo Program 1 Demo Program 2 Demo Program 3 No Function 0-10 11-40 41-70 71-100 101-130 131-160 161-190 191-220 221-255 0-255 0-79 80-99 100-150 151-200 201-250 251-255 Closed Open Strobe (fast to slow) Open Open Pulse (fast to slow) Open
9 Color 10 11 12 13 14 15 16 17 Red 1 Green 1 Blue 1 White 1 Red 2 Green 2 Blue 2 White 2 No Function Moroccan Pink Pink Rose Pink Follies Pink Fuchsia Pink Hot Pink Congo Blue Tokyo Blue Deep Blue Blue Medium Blue Double CT Blue State Blue Full CT Blue Half CT Blue Steel Blue Lighter Blue Light Blue Medium Blue Green Dark Green Primary Green Moss Green Fern Green JAS Green Lime Green Spring Yellow Deep Amber Chrome Orange Orange Gold Amber Millennium Gold Flame Red White Color Fade Clockwise (fast to s
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Red 3 Green 3 Blue 3 White 3 Red 4 Green 4 Blue 4 White 4 Red 5 Green 5 Blue 5 White 5 Red 6 Green 6 Blue 6 White 6 Red 7 Green 7 Blue 7 White 7 Red Intensity 3 Green Intensity 3 Blue Intensity 3 White Intensity 3 Red Intensity 4 Green Intensity 4 Blue Intensity 4 White Intensity 4 Red Intensity 5 Green Intensity 5 Blue Intensity 5 White Intensity 5 Red Intensity 6 Green Intensity 6 Blue Intensity 6 White Intensity 6 Red Intensity 7 Green Intensi
Cleaning and maintenance Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and electronics checked by an expert every 2 years. The following points have to be considered during the inspection: 1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded. 2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
Warranty Information Warranty Conditions • Unless otherwise stated in writing, your product is covered by a one year parts and labor limited warranty. • LEDs are not guaranteed to match in color temperature or output. • It is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and reseller or distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty period.
