User manual

Rigging the fixture

Caution!

1. The installations must be carried out by an authorized dealer or trained professional.

2. Unit may cause severe injures if you have doubts concerning the safety do not install.

3. Unit is to be 24inches away from flammable materials (decoration material)

4. Use high quality installation equipment to hang unit.

When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experi-

ence including but not limited to calculating working loads, material being used and periodic safety inspections. If you

lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.

When rigging the unit always be secured with a secondary safety attachment. The installation location of the projector

has got to be built in the way that it can hold 10 times the weight for 1 hour with out any damage. Installation should be

checked at least one time a year by a skilled person.

Main Control

The control board on the fixture base is your interface to access and

control all the functions on the unit. Its LED display gives you a code

view of the options and functions. The following will explain each func-

tion and its options.

DMX

MASTER

SLAVE

SOUND

MENU ▲ ▼ ENTER

5718 Kenwick St

San Antonio TX 78238

800-460-MEGA

www.mega-lite.com

—DMX512—

ADDR:001

This function allows you to set your DMX Start Channel. First make sure you

have a proper DMX connection from your controller using the 3 or 5 pin XLR con-

nection. If there is no DMX connection the display will flash and read No DMX

ADDR:001. If there is proper DMX connection the display will be solid on and will

read DMX 515, there will also be a Green indicator light that will turn on.

To Set the DMX Start Channel press the ▲ then press Enter. Use the ▲ or ▼ to

select the desired DMX Start Channel and press Enter to confirm your setting.

>Work Mod

DMX 512

DMX 512= This mode will allow you to operate the fixture with a DMX con-

troller

Auto= This Function slows the unit to run a preset program

Sound= On Sound Mode the fixture will trigger the preset program with the

ambient audio sensitivity.

To Set the Desired operational mode press the ▲ then Press Enter. Use the ▲

or ▼ to select the desired DMX Start Channel and press Enter to confirm your

setting.