User manual

7
>Chan Mod
17CH
To set the desired operational channel mode press Enter. Use the ▲ or ▼ to
select the desired DMX profile operational mode from 6,17 or 37 and press Enter
to confirm your setting.
Note: Operational mode are located on Page 8 of the manual.
>Tool
DimmMod
>DimmMod
Smooth
This function will give you access to the Display Control press Enter. Use the ▲
or ▼ to select the desired display operational Mode from turn off in 60 second or
stay On, press Enter to confirm your setting.
>Display
60S
This function will give you access to the LED Dimming curve press Enter. Use
the ▲ or ▼ to select the LED dimming operational Mode from fast or smoth,
press Enter to confirm your setting.
>PT Sett
Xrevise
If you wish to fine adjust your Pan extreme position press Enter. Use the ▲ or
▼ to select the desired Pan extreme position, press Enter to confirm your setting.
>Xrevise
000
If you wish to fine adjust your Tilt extreme position press Enter. Use the ▲ or ▼
to select the desired Tilt extreme position, press Enter to confirm your setting.
>Yrevise
000
To invert the Pan position press Enter. Use the ▲ or ▼ for yes or no to invert,
press Enter to confirm your setting.
>Xreverse
NO
To invert the Tilt position press Enter. Use the ▲ or ▼ for yes or no to invert,
press Enter to confirm your setting.
>Xreverse
NO
To adjust the speed of Pan & Tilt position press Enter. Use the ▲ or ▼ for slow,
normal and fast, press Enter to confirm your setting.
>XYspeed
fast
To adjust press Enter. Use the ▲ or ▼ for Yes or No, press Enter to confirm
your setting.
>XYfbsti
yes
>Control
CH01
To access the control channels via display press Enter. Use the ▲ or ▼ to se-
lect the desired DMX Channel press Enter to access that function use the ▲ or
▼ to adjust the channel.
Note: Operational Channels are located on Page 10 of the manual.
>DmxLive
CH1
To view the status of every channel via display press Enter. Use the ▲ or ▼ to
select the desired DMX Channel press Enter to view the channel status.