User manual

ManualsBrandsMega Lite ManualsFlood LightDrama LED Q170

USER MANUAL

Table of Contents

Safety Information……………………………………………………. 3

Specifications………………………………………………………….. 4

Main Power Connection…………………………………………….. 5

DMX-512 Connection……………………………...……………...... 5

DMX Profile.................................................................................... 7

Main Control Menu......................................................................... 8

Rigging the Fixture…………………………………………………….10

Cleaning & Maintenance................................................................10

Parts List........................................................................................ 10

Summary of content (11 pages)

PAGE 1
USER MANUAL Table of Contents Safety Information……………………………………………………. 3 Specifications………………………………………………………….. 4 Main Power Connection…………………………………………….. 5 DMX-512 Connection……………………………...……………...... 5 DMX Profile.................................................................................... 7 Main Control Menu......................................................................... 8 Rigging the Fixture…………………………………………………….10 Cleaning & Maintenance.....................................................
PAGE 2
PAGE 3
Check that the unit has not been damaged during transport Protection Against Fire 1. 3. 4. 5. 6. Maintain a minimum of 1 foot distance from any type of flame. Replace fuse only with the specified type and rating. Do Not install the unit to close to a heat source. Make sure cable are properly secured away from unit movement. Maximum surface operating temperature 130º. Protection Against Fire 1. 2. 3. 4. Disconnect power before servicing. For connection to main power supply proceed to page 5.
PAGE 4
Technical Information Part Numbers Fixture 7010-Drama LED Q170 Mechanical Specifications DMX Connectors: 3-pin XLR connectors in/out 22.25” Power Connections: Neutrik Power Con to Male Nema 5 15 Thermal: Maximum ambient temperature 104°F Maximum surface temperature 130° C Display: Digital Fastening System: Mounting Yoke Gobo Size: 85mm, image size 30mm Fixture Packaged for Shipping Size: 22.25”L x 14.25”W x 1.25”H Size: 26”X 12” X 12 Weight: 14.
PAGE 5
Main Power ConnecCaution! 1. 2. 3. 4. Do not connect fixture to a dimmer system. This unit has Auto switching power supply. It will respond to 110V or 220V automatically This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating.
PAGE 6
Lux Output 6
PAGE 7
DMX Profile Drama Q170 4 Channel Mode DMX Chanel 1 2 3 4 Function LED Color LED Color LED Color LED Color Description Red LED intensity Green LED Intensity Blue LED Intensity White LED Intensity Value 0-255 0-255 0-255 0-255 Drama Q170 7 Channel Mode DMX Chanel 1 2 3 4 5 Function Dimmer LED Color LED Color LED Color LED Color 6 Macro 7 Strobe Description Dimmer Off to Full Red LED intensity Green LED Intensity Blue LED Intensity White LED Intensity No Function Color fade All (slow to fast) Color
PAGE 8
Main Control The control board on the fixture base is your interface to access and control all the functions on the unit. Its digital display gives you a control of the options and functions. The following will explain each function and its options. Address 001 ESC Enter Down Address 001 Channel Mode Red Green Blue White 1-512 4 Channel Mode 7 Channel Mode 0-255 0-255 0-255 0-255 Address 001 Up Color Fade 0-15 DMX Address Press Enter to select.
PAGE 9
White White DimThis function allows you to dim the white LED . Press Enter use the up/down keys to select desired dimmer settings. Press Enter then ESC to confirm the settings. (255 Steps) Color Fade Color Fade This function allows you to access the pre program fade effect. Press Enter use the up/down keys to select desired fade speed settings. Press Enter then ESC to confirm the settings.
PAGE 10
Rigging the fixCaution! 1. The installations must be carried out by an authorized dealer or trained professional. 2. Unit may cause severe injures if you have doubts concerning the safety do not install. When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experience including but not limited to calculating working loads, material being used and periodic safety inspections.
PAGE 11
Warranty Information Warranty Conditions -Unless otherwise stated in writing, your product is covered by a one year parts and labor limited warranty. -LEDs are not guaranteed to match in color temperature or output. -It is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and reseller or distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty period.