USER MANUAL Table of Contents Safety Information……………………………………………………………………………………………. 3 Specifications…………………………………………………………………………………………………….. 4 Main Power Connection…………………………………………………………………………………..6 DMX-512 Connection…………………………………………………………………...……………...... 6 Main Control Menu Tri-Chip…………………………………………………………………………… 7 DMX Profile Tri-Chip.........................................................................................................9 Main Control Menu Quad-Chip…………………………………………………………………….
Check that the unit has not been damaged during transport Protection Against Fire 1. 3. 4. 5. 6. Maintain a minimum of 1 foot distance from any type of flame. Replace fuse only with the specified type and rating. Do Not install the unit to close to a heat source. Make sure cable are properly secured away from unit movement. Maximum surface operating temperature 80º. Protection Against Fire 1. 2. 3. 4. Disconnect power before servicing. For connection to main power supply proceed to page 5.
Specifications Part Fixture 7110-EvriColor 7111-EvriColor 7112-EvriColor 7113-EvriColor CM5 CM5 CM5 CM5 TRGB (Red, Green, Blue) TACW (Amber, Cool White, Warm White) QRGBW (Red, Green, Blue, White) PRGBWA (Red, Green, Blue, White, Amber) Mechanical Specifications DMX Connections: XLR 3 pin Or XLR 5 Pin Power Connection: Nema 5-15 Thermal: Maximum ambient temperature 104° Maximum surface temperature 140° Fastening System: Dual mounting yoke 6.75” 9.86” 9” 13.25” Fixture Packaging Size: 13.
Ordering Information LED Color Item Number 7110 18Tri x 3W 7111 18Tri x 3W 7112 12 x 10W 7113 12 x 12W TRGB TACW QRGBW FRGBWA Tri Beam Angle Tri Red ,Green Blue Tri Amber, Warm White, Cool White Quad Red, Green, Blue, White Fixture Color DMX Input 15 15° BLAK Black 3 3 pin in and out 25 25° WHIT White 5 5 pin in and out 45 45° XXXX Custom 60 60° 3W 3 pin in and out & Wireless DMX 5W 5 pin in and out & Wireless DMX Quad & Five Beam Q25 25° Q45 45° Penta Red, Green
Main Power Connection Caution! 1. 2. 3. 4. Do not connect fixture to a dimmer system. This unit has Auto switching power supply. It will respond to 110V or 220V automatically This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating. This fixture is equipped with a auto switchable power supply that will let the unit operate from 110V or 220V from 50Hz to 60Hz.
Main Control Menu for 7110 or 7111 Tri Chip LED model The control board on the fixture base is your interface to access and control all the functions on the unit. Its digital display gives you a code view of the options and functions. The following will explain each function and its options.
Flash This function allows you to strobe the LED’s on the whole . Press Enter use the up/down keys to select desired flash settings. Press Enter to confirm the settings. Fade Scroll This function allows you to fade the LED’s on the whole strip from one color to another. Press Enter use the up/down keys to select desired fade speed settings from 0 to 20. Press Enter to confirm the settings.
DMX Profile for 7110 Tri R,G,B Chip LED model EvriColor 3 Channel Mode DMX Chanel 1 2 3 Function LED Color LED Color LED Color Description Red LED intensity Green LED Intensity Blue LED Intensity Value 0-255 0-255 0-255 EvriColor 4 Channel Mode DMX Chanel Function 1 Dimmer 2 3 4 LED Color LED Color LED Color Description Dimmer Strobe (slow to fast) Dimmer Full On Red LED intensity Green LED Intensity Blue LED Intensity Value 0-152 153-242 243-255 0-255 0-255 0-255 EvriColor 6 Channel Mode DMX C
DMX Profile for 7111 Tri A,W,C Chip LED model EvriColor 3 Channel Mode DMX Chanel 1 2 3 Function LED Color LED Color LED Color Description Amber LED intensity Warm White LED Intensity Cool White LED Intensity Value 0-255 0-255 0-255 EvriColor 4 Channel Mode DMX Chanel Function 1 Dimmer 2 3 4 LED Color LED Color LED Color Description Dimmer Strobe (slow to fast) Dimmer Full On Amber LED intensity Warm White LED Intensity Cool White LED Intensity Value 0-152 153-242 243-255 0-255 0-255 0-255 Evri
Main Control Menu for 7112 Quad Chip LED model CONTROL BOARD The control board on the fixture base is your interface to access and control all the functions on the unit. Its digital display gives you a code view of the options and functions. The following will explain each function and its options.
Flash This function allows you to strobe all the LED on full . Press Enter use the up/down keys to select desired flash speed settings from 0 to 15. Press Enter to confirm the settings. Fade Scroll This function allows you to fade the LED’s from one color to another. Press Enter use the up/down keys to select desired fade speed settings from 0 to 15. Press Enter to confirm the settings.
DMX Profile for 7112 Quad Chip LED model EvriColor 4 Channel Mode DMX Chanel 1 2 3 4 Function LED Color LED Color LED Color LED Color Description Red LED intensity Green LED Intensity Blue LED Intensity White LED Intensity Value 0-255 0-255 0-255 0-255 EvriColor 7 Channel Mode DMX Chanel 1 2 3 4 5 Function LED Color LED Color LED Color LED Color Strobe 6 Macro 7 Dimmer Description Red LED intensity Green LED Intensity Blue LED Intensity White LED Intensity Strobe (slow to fast) Random Strobe (slo
Main Control Menu for 7113 Penta R,G,B,W,A Chip LED CONTROL BOARD DMX Address 1-512 DMX Mode 5-Ch 8-Ch Red Dimmer Green Dimmer 0-15 0-15 Blue Dimmer 0-15 White Dimmer 0-15 Amber Dimmer 0-15 Fade Scroll Fade Scroll 00-15 00-15 Menu Up Down Enter DMX Address Press Enter to select the DMX start channel use the up/down keys, display will be flashing once you have selected the desired start channel Press Enter to confirm display will stop flashing.
White Dimmer This function allows you to dim up or down the white LED’s . Press Enter use the up/down keys to select desired dimmer settings. Press Enter to confirm the settings. Amber Dimmer This function allows you to dim up or down the amber LED’s . Press Enter use the up/down keys to select desired dimmer settings. Press Enter to confirm the settings. Flash This function allows you to strobe all the LED’s. Press Enter use the up/down keys to select desired strobe speed settings from 0 to 15.
EvriColor 5 Channel Mode DMX Chanel 1 2 3 4 5 Function LED Color LED Color LED Color LED Color LED Color Description Red LED intensity Green LED Intensity Blue LED Intensity White LED Intensity Amber LED Intensity Value 0-255 0-255 0-255 0-255 0-255 EvriColor 8 Channel Mode DMX Chanel 1 2 3 4 5 6 Function LED Color LED Color LED Color LED Color LED Color Strobe 7 Macro 8 Dimmer Description Red LED intensity Green LED Intensity Blue LED Intensity White LED Intensity Amber LED Intensity Strobe (slow
Rigging the fixture Caution! 1. 2. 3. 4. The installations must be carried out by an authorized dealer or trained professional. Unit may cause severe injures if you have doubts concerning the safety do not install. Unit is to be 24inches away from flammable materials (decoration material) Use high quality installation equipment to hang unit. When rigging a unit it is very important that you follow common safety procedures.
Warranty Information Limited Warranty Unless otherwise stated, your product is covered by a one year parts and labor limited warranty. Dichroic filters and glass gobos are not guaranteed against breakage or scratches to coating. It is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and dealer or distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty period.