Specifications

IAQ INSTRUMENTS
Toll Free: 1.800.293.3003 emssales.net
35
Environmental Monitoring Systems
Protimeter MMS Plus
3 In 1 Moisture Meter & Hygrometer
Now Featuring 0-100% Humistick Sensor
The moisture you cannot see matters most when cleaning and restoring a property after
water damage from storms, floods or fires. From hidden mold to unseen structural damage,
undetected moisture damages health and property and its oversight can create liability. That’s
why the right moisture meter makes the difference.
The MMS Plus is a complete moisture measurement system in one easy-to-use robust
instrument.
• Hygrometer mode measures relative humidity, ambient temperature, dew point and grains per
pound with a replaceable Humistick™ probe
• Pin measure mode determines moisture content of wood and Wood Moisture Equivalent
(WME) in other building materials
• Pinless measure mode uses radio frequency to detect moisture non-invasively
• Diagnose the extent of moisture intrusion for damage assessment and monitor drying out of
building structures
• Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and
surface structures
Search behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings,
wood, drywall, plaster, masonry, concrete and concrete block.
• Non-invasive pinless radio frequency finds moisture up to 3/4 in (19 mm) below surface
• Search mode not adversely affected by surface moisture
Hygrometry checks the dehumidification process and monitors buildings for adequate
ventilation affecting indoor air quality.
• Measures moisture in concrete floors using ASTM F2170-02
• Measures relative humidity and temperature, dew point and surface temperature, surface
proximity to dew point (condensation) and grains per pound
• Use to detect conditions for mold and fungus growth, that can lead to unhealthy living
conditions
MMS kit with Humistick/Software Package includes:
• Data download software with cable (BLD5810)
• Humistick (POL7750) Range 0-100%, fast responding)
• Surface temperature sensor (BLD5804)
• 5” (127 mm) insulated deep wall probes (BLD5018)
• Pin moisture probe and hygrostick lead (BLD5060)
• Calibration check device (BLD5086)
• Hygrostick/Humistick ext. lead, 30” long ( 76 cm) (BLD5802)
• Instructions and nylon zipper pouch
• Wood species calibration table
• One year parts and labor warranty
World Leaders in Moisture Measurement
and Dampness Diagnosis
120305
120307
Protimeter Mini-Moisture Meter
The Definitive Moisture Meter
The most widely used moisture meters in the
world are probably the Protimeter Mini series.
These compact, general purpose moisture
meters are used by building professionals and
trades across the globe to check the moisture
level of wood and masonry products for a vast
range of quality control and dampness diagnosis
applications.
Protimeter has now launched a new version
of the famous Mini moisture meter. The new
Mini incorporates a range in design refinements
and features that make it much simpler to use
than the instrument it supersedes. The stylish
instrument case fits snugly in the hand, so it can
be used effortlessly for long periods and the new
display is very bright for visual clarity.
Also, if the instrument is inadvertently left on, it
switches off automatically after five minutes to
save the battery life.
Protimeter has used their knowledge and
expertise to produce an instrument that combines
sympatric design with optimized functionality.
Specifications:
• Calibration chart for over 150 wood species
• Power 2 x AA
• Pin Measurement Range 6-100
• Read out - 60 bright LED’s
• Pouch
• Calibration Check
PROTIMETER
Moisture Meters