User manual
7
Fade
This function allows you to select a preprogrammed fade sequences. Press Enter use the up/down keys to select desired fade
program (15 options). Press Enter to set the desired sped use the up/down keys (15 options). Press Enter to confirm the
settings.
Flash
Dimming Speed
Press Enter to select the desired dimming speed when used with a DMX controler. Use the up/down keys to select from 0 to 3.
0 speed will be the fastest 4 will be the slowest. Press Enter to confirm.
DMX Address
Press Enter to select the DMX start address channel. The first display will let you know what operation mode you are in. Use
the up/down keys to select the desired mode. Press Enter to confirm. (first Letter will also change depending on what mode you
are in) Use the up/down keys to select the desired start address press Enter to confirm
Set Color Menu
Press Enter to set a color via display control. . Use the up/down keys to select the desired color you would like to adjust. Press
Enter to confirm. Use the up/down keys to select the desired intensity of the color. Press Enter to confirm.
This function allows you to select a preprogrammed strobe sequences. Press Enter use the up/down keys to select desired
strobe program (15 options). Press Enter to set the desired sped use the up/down keys (15 options). Press Enter to confirm
the settings.
Menu Up Down
Enter
Address mode
DMX Indicator
When DMX Signal is being received the last point on the control board display will turn flash. If
there is no DMX signal present is will be on.