Use and Care Manual

855-833-6483 OR EMAIL US AT [e-mail]!
PROBLEMS? DO NOT RETURN TO STORE! CALL US AT
13
TIRES
INSPECTING Y OUR TIRES
Regularly perform an in-depth inspection of your tires as part of your maintenance
routine. Park the mini bike on a rm, level surface and turn the engine stop switch
to the “off” position. Look for bumps or bulges in the sidewall of the tire and inside
of the treads. Look closely for cuts, slits or cracks. Check for signs of excessive
wear. Check for rocks, screws, nails or other objects embedded in the tires or tread.
Replace all tires before the tread depth gets below .12 inches or anytime you notice
a reduction in traction. Remove any foreign objects. Replace any tire if you can see
a fabric or cord showing through or if there are any bumps or bulges.
Inspect your rims. If you notice the rims are bent or dented, take your mini bike to
the nearest Authorized Monster Moto Service Center. Never ride with a bent or
dented rim.
ADDING AIR TO Y OUR TIRES
The mini bike’s tires should be inated to 10 psi in order for the mini bike to operate
properly. As part of your regular maintenance routine, use a tire pressure gauge
to check the air pressure in both of the tires. If necessary, use a hand pump or an
electric air pump to inate the tires to the recommended level. Always check the air
pressure when your tires are cold. If you check the air pressure when the tires are
warm, you will receive an articially high reading. Never check or add air to your tires
while the mini bike is running.
REPAIRING Y OUR TIRES
Your mini bike has tubeless tires. If your tire has been damaged, take it to an
Authorized Monster Moto Service Center to have it repaired immediately. If the
tire is damaged beyond repair, please call us at 855-833-6483 or email us at
[e-mail] to purchase a replacement tire. Monster Moto will also
help direct you to an Authorized Monster Moto Service Center who can install the
replacement tire for you.