User manual

Chapter 3: Web Interface

Fig.18 iCAMView NetFeeler Lite Settings

i. NetFeeler Lite

Temperature High / Low

Select the maximum / minimum temperature range. If the temperature crosses

these figures, NetFeeler Lite will send out an alarm.

Humidity High / Low

Select the maximum / minimum humidity range. If the humidity level crosses

these figures, NetFeeler Lite will send out an alarm.

3.2.3.4 Network

This option determines iCAMView Network settings.

i. IP Address

By default, the IP address acquisition is set to using DHCP.

Fig.19 iCAMView IP Address Settings

IP Address

This determines iCAMView LAN IP address.

Subnet Mask

iCAMView - user manual -20-