User manual

Chapter 3: Web Interface
3.2.4.5 iMage Server
The iMage Server allows the user to view his camera directly from the internet without
having to set-up DDNS or Router’s NAT. All the user has to do is to log onto the
iMage Server’s webpage and register an account.
Once the iMage Account is registered. The user can bring iCAMView to anywhere
with an internet connection, log onto www.iCV99.net and access the video stream.
Fig.53 iMage Server settings page
Enable
Choose Yes to enable this feature or No to disable.
Community
This is a security feature. Set a Community password to add an extra level of
internet security to iCAMView. Each unit is assigned a 6 digit Community ID by
default. Change this to prevent unauthorized access.
Click Apply to confirm settings.
To activate the iMage Server account;
1. Click Goto iMage Server. Your browser will redirect you to the iMage
Server site www.iCV99.net.
2. For first time login, click Register (see below). Be sure to have the
following information at hand;
i. iCAMView Serial Number,
iCAMView - user manual -44-