User manual

Appendix A: Router Configuration
7. Under Internal Port No type in: 80
8. Under External Port No type in: 80
9. Click on Add to save these settings.
10. In the first box, next to the Enable checkbox, type in: iCAMView Cam.
11. In PC (Server), select your camera or the camera’s IP address from the list. If the
camera is not listed, select the link titled “My PC is not listed.”
12. Leave Protocol as TCP.
13. Under Internal Port No type in: 9001
14. Under External Port No type in: 9001
15. Click on Add to save these settings. iCAMView should now be configured to work
with your router and be accessible from the Internet.
iCAMView - user manual -68-