- Mega System Technologies iCAMView Web Server User Manual For models: iCV-01a , iCV-01b, iCV-02, iCV-03
iCAMView user manual     -64- 
Appendix A: Router Configuration 
Appendix A: Router Configuration 
The following section describes the initial configuration of the router and port 
forwarding for your router. If your router is not listed here, please refer to the 
manufacturer’s website for assistance with configuring your router to work with 
iCAMView. 
Port Forwarding for iCAMView 
iCAMView requires certain ports to be open on your router to allow other computers 
on the Internet to “see” it on your internal network. Normally, your router will have the 
less common ports disabled or blocked by the router’s built-in firewall. In order for the 
iCAMView applications to work properly and not be blocked, the firewall settings need 
to be configured. In each instance there will be a trigger port and incoming port(s), 
where traffic on the trigger port tells the Firewall to open the incoming ports. The 
iCAMView require that TCP Port 80 and UDP 9001 (default settings) be opened to the 
Internet. TCP Port 80 is used for accessing the camera’s homepage and UDP Port 
9001 is used for authentication and video streaming. 
If your Internet service Provider blocks port 80/9001, you’ll need to reconfigure your 
camera and router to other ports such as 81/9002, 82/9003, etc. To change the port 
settings on the camera, you’ll need to use iCAMView Utility. 
Follow the steps below to configure your router, depending on the router manufacturer 
and model. If your particular router manufacturer or model is not listed below, please 
contact your router manufacturer for further assistance in configuring the router. 
The Following Router manufacturers and models are included in this document: 
Brand Model  Description 
3Com  3C857-US  OfficeConnect Cable/DSL Gateway 
 3CRWE52196 OfficeConnect Wireless Cable/DSL 
Gateway 
Belkin  F5D6230-3  Wireless Cable/DSL Gateway Router 
  F5D7230-4– 54g  Wireless DSL/Cable gateway Router 
D-Link DI-604/DI–614+/DI-624 - 
 DI-704/704P - 
 DI714  - 
 DI-714P+  - 
Dell TrueMobile 2300 
Wireless Broadband 
Router 
- 
Linksys  BEFSR41  EtherFast Cable/DSL Router 
  BEFSX41  Instant Broadband EtherFast Cable/DSL 
Firewall Router with 4-Port Switch/VPN 
EndPoint 
  BEFW11S4  Wireless Access Point Router with 4-Port 
Switch – Version 2 
Microsoft  MN-100  Wired Base Station 










