Specifications

Brake assessment manual Ver 1.0 Published October 2013 14 (48 pages)
Key to Table 3 on page 13:
* means this test does not need to be done on a road or road-type test facility.
+ means this test can be done with a static brake test machine.
T means a test is required for a particular modification. Refer to Appendix 5 for details of the
tests.
# the tests that apply to Modification 21 are under review.
T5/10 means the test comprises either 5 runs in the MLTM or 10 runs in the LLTM condition.
16a applies to vehicles manufactured prior to the introduction of ADR 31 on 1 January 1977.
16b applies to vehicles manufactured after the introduction of ADR 31 on 1 January 1977.
Note: Although 16a and 16b require the same tests, different speeds apply to most of them.
22a applies to vehicles with a change in tyre/wheel diameter less than 26 mm
22b applies to vehicles not fitted with ABS with a change in tyre/wheel diameter greater than
26 mm.
22c applies to vehicles fitted with ABS with a change in tyre/wheel diameter greater than
26 mm.