Specifications

OCTE SAFEdoc
TRANS
Electronic Test Equipment
1. WEAR PERSONAL PROTECTIVE EQUIPMENT INCLUDING SAFETY GLASSES when
using electronic test equipment.
2. Make certain your work area is clean and clear of debris.
3. Ensure participants or observers are wearing personal protection equipment.
4. Follow guidelines for equipment hook-up provided by the equipment’s manufacturer.
INCORRECT TEST EQUIPMENT CONNECTIONS MAY RESULT IN PERSONAL
INJURY OR EQUIPMENT DAMAGE.
5. Before making any connections make certain the equipment is in good condition. Check
cords and electrical terminal points for visible damage.
6. Connect + to + and – to -- . Make sure no sparks are created around the automobile’s
electronic systems or storage battery.
7. Follow the automobile manufacturer’s testing procedures as found in the appropriate
repair manual. INCORRECT TESTING PROCEDURES MAY DO SIGNIFICANT
DAMAGE TO EXPENSIVE ON-BOARD ELECTRONIC AND COMPUTER
COMPONENTS.
8. Never take the test equipment apart. SOME TEST EQUIPMENT COMPONENTS HAVE
HIGH VOLTAGE CIRCUITRY THAT IS CAPABLE OF GIVING SEVERE ELECTRICAL
SHOCKS.
9. Never place test equipment or leads near hot surfaces or rotating engine parts.
10. When testing procedures are complete, safely disconnect all leads and carefully store
equipment away.
AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR
Transportation SAFEdoc Page 22