Specifications

OCTE SAFEdoc
TRANS
Floor Jacks
WARNING: IMPROPER USE OF FLOOR JACKS CAN LEAD TO SERIOUS INJURY OR
DEATH
1. WEAR PERSONAL PROTECTIVE EQUIPMENT INCLUDING SAFETY GLASSES when
jacking up a vehicle.
2. Make certain the work area is free and clear of parts and debris.
3. With the vehicle on a level surface, put the vehicle’s emergency brake on and block the
wheels.
4. All vehicle doors must be closed before jacking vehicle.
5. Refer to the vehicle manufacturer’s lifting points for raising the vehicle and place jack
securely under specified axle, body, or frame area.
6. Raise vehicle to desired working height, checking periodically to ensure jack stays
positioned. No person is to be completely or partially under the vehicle until it is secured.
7. Position the safety stands under frame or axle area using a push rod.
8. Lower the vehicle slowly onto the stands and ensure the stands are correctly placed and
they are carrying an even distribution of weight. Push on bumper to check for stability
before proceeding under vehicle. Be aware of the exit points from under the vehicle.
HAVE THE TEACHER CHECK YOUR SET-UP BEFORE PROCEEDING.
9. Vehicles can be hot; caution should be used while working under vehicles.
10. Before lowering a vehicle ensure everyone is clear and away from pinch or contact points.
11. Make teacher aware you are starting to jack a vehicle.
AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR
Transportation SAFEdoc Page 26