Specifications

OCTE SAFEdoc
TRANS
Metal Cut Off (Chop) Saw
1. WEAR PERSONAL PROTECTIVE EQUIPMENT INCLUDING GLOVES AND FACE
SHIELD OR GLASSES when using a metal chop saw.
2. All jewelry must be removed, and long hair tied back securely.
3. Stand to the side of the disc assembly when operating the saw.
4. Students who are left-handed should use their right hand for cutting operations.
5. Clamp material firmly and ensure you are aware of the blade path before you make your
cut.
6. Prior to using the saw check the condition of the cord and the abrasive cutting disc.
7. Long stock pieces should be supported safely.
8. Ensure the guard is functioning correctly during operations.
9. When making angle cuts ensure the cutting disc has adequate clearances.
10. Start the saw off the metal and gradually make the cut with even force on the abrasive
disc.
11. Pieces of metal that have just been cut will have SHARP EDGES AND WILL BE HOT to
touch.
AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR
Transportation SAFEdoc Page 32