Specifications

OCTE SAFEdoc
TRANS
Wheel Balancer
1. WEAR PERSONAL PROTECTIVE EQUIPMENT INCLUDING SAFETY GLASSES when
using a wheel balancing machine.
2. Visually inspect the tire and rim for defects, and make certain the work area is free and clear
of parts and debris.
3. Remove old balancing weights from rim. Remove gravel and mud from tire.
4. Select the correct size of centering cone and securely mount the wheel on the balancer.
LARGE TIRES ARE HEAVY. PROPER LIFTING AND HANDLING PROCEDURES ARE TO
BE FOLLOWED.
5. Safely follow the wheel balancer’s operational procedure (as listed by the manufacturer of the
machine) and accurately calibrate the machine for the wheel being balanced.
6. Ensure the protective hood is down prior to starting the machine, and that HANDS/FINGERS
ARE FREE OF THE ROTATIONAL AREA.
7. Open the hood only when rotation has completely stopped.
8. Use the special weight pliers to install the recommended weights.
9. Re-spin the tire on the machine to verify the tire is balanced and that it will perform vibration
free on the vehicle.
10. Carefully remove the wheel from the machine to avoid personal injury and to prevent damage
to the machine.
11. Make certain you control the bounce of the tire on removal.
12. Ensure the teacher is aware that you are about to use this equipment.
AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR
Transportation SAFEdoc Page 43