Setup guide

Mega 200VWR Router
Chapter 4: Configuration
109
Configuring L2TP VPN in the Branch Office
The IP address 69.1.121.30 is the Public IP address of the router located in head office. If you registered
a DDNS account, (please refer to the DDNS section of this manual), you can also use the DDNS domain
name instead of the IP address to reach the router.
Item Function Description
1 Connection Name BranchOffice Given name of the L2TP connection
Dial out select Dial out
2
Server IP Address (or
Hostname)
69.121.1.33 IP address of the head office router (WAN side)
Peer Network IP 192.168.1.0
3
Netmask 255.255.255.0
Head office network
Username username
4
Password 123456
Username & password required to to authenticate
the branch office network
5 Auth.Type Chap(Auto)
Keep these settings set to the default values in
most cases..
6 Idle Timeout 0
The connection will be disconnected when there is
no traffic over it for this predefined period of time.
If Idle time is set to 0, it means that the connection
will never time out.
IPSec
Select Enable to enhance your L2TP VPN
security...
Authentication MD5
Encryption 3DES
Perfect Forward Secrecy None
7
Pre-shared Key 12345678
Both sides of the tunnel should use the same
settings for these options.
1
4
3
2
5
6
7