Use and Care Manual

6. Lower the lid (A),gripping the handle and turning it gently Up
forwards(Fig.4)
7. Insert the temperature controller (G) into the inlet(I) located
on the side of the nonstick surface plate (C)(Fig.5) and plug the
power cord into a socket. Refer to below photo :
INSTALLATION CONT.
Figure 5
I
Inlet
G
Temperature
Controller
C
Nonstick Surface
8. Set the dial on the Temperature controller (G) to the required
heat setting .
Please refer to the “Operation” - Set the dial on the Temperature
controller (H) to the required heat setting.