Use and Care Manual
OPERATION
1. Turn On by turning the dial on the Temperature Controller (G)
from the “OFF” position
2. Continue turning the knob to the desire temperature based on
the food being prepared.
3. Please refer to the table below with dierent settings:
Function Settings
Settings Function
Warm - 250F Low Heat - to keep food warm
Medium Heat - Cooking foods thoroughly
High Heat - For quick cooking and sealing the juices
Super Heat - To brown foods quickly
250F- 350F
350F - 400F
450F
4. The light on the Temperature controller (G) will turn red to
indicate that the unit is in the “On” position and warming up to
the desired temperature.
5. The indicator light on the Temperature controller (G) will
switch o once the desired temp has been reached, and the
grill’s ready for use
6. The indicator light on the temperature controller(G)shows that
the grill is heating up and it will stay lit until the grill reaches the
set desired temperature chosen by the operator; after this, it will
switch on and o in cycles during the cooking process to
guarantee that the selected temperature is maintained.
7. The pre-heating time depends on the chosen heat setting.
The higher the selected temperature,the longer the pre-heating
time will be.
8. When cooking is complete, remove the temperature controller
(G) carefully which might be hot, and lift the lid(A) using the
handle.
This product is for household use only.