Use and Care Manual

PREHEAT
1. Connect the plug to a grounded outlet.
2. Press button for 3 seconds to switch on the product. (Figure 5)
* The display shows the temperature chosen last time.
3. Press the buttons(on the left) to set your desired temperature. Press
the buttons(on the right) to set your desired time. See ‘Settings’
section in this book to determine the appropriate temperature and time.
(Figure 6)
Tip: Long press buttons to fast forward or backward to adjust the
temperature and time more quickly.
Note: If you do not want to warm-up and start frying immediately, skip
step 4 and operate according to ‘hot air frying’ section instructions in this
book.
4. Press the button to start heating. (Figure 5)
Display shows timer countdown from the set time. When you hear the
timer bell for 3 times, the set preparation time has elapsed and display
shows the set temperature. Preheat has nished.
HOT AIR FRYING
1. Open the drawer by pulling the handle. (Figure 2)
2. Put the ingredients in the basket. (Figure 7)
3. Use the handle to slide the frying pan back into the air fryer. (Figure 8)
Never use the pan without the basket in it. If the appliance is heating
ingredients in the absence of the basket, use a special oven glove to open
the drawer. The side walls and edge of the drawer can become very hot.
4. Press the timer buttons to set the required time. See ‘Settings’
section in this book to determine the correct cooking time. (Figure 6)
Tip: Long press the timer buttons to quickly adjust the time forward
or backward.
Note: Add 3 minutes to the preparation time when the appliance is
without preheat.
Note: If the required cooking time is not set within 5 minutes, the
appliance will automatically shut down out of safety concern.