Use and Care Manual

10 | MC1000 -158C| THE IMMERSION BLENDER
Do not operate the blender for more than 30 seconds
each blending cycle. Allow a 3 minutes resting period
every two consecutive blending cycles.
BLENDING ARM
1. Align the blending arm dips to
the main body release button.
2. Push the blending arm upward
until it clicks. The blending arm
is now securely attached to the
main body.
1. To detach the blending arm, press the release
buttons on both sides of the main body
2. Pull down the blending arm.
ALWAYS GRAB THE BLENDING ARM BY THE HEAD OR THE
SHAFT TO PREVENT INJURIES.
DETACHING THE BLENDING ARM
ATTACHING THE BLENDING ARM