Use and Care Manual

5 Megachef MCWT-9200
IMPORTANT SAFEGUARDSHow to use the Warming Tray
Note: There will be a faint smell when using the warming tray
for the first time but this is quite normal and will fade with use.
WARNING: This appliance will get hot during use, please use
extreme caution.
• Place the warming try on a flat surface, making sure the
warming tray does not wobble and sits firmly on the flat
surface.
• Plug the warming tray in the power supply and switch ON
by turning the knob. The red light will turn on indicating the
warming tray is operational.
• The warming tray will stay on and the light will turn off once the
desired heat temperature is reached.
• Place the prepared food on the plate or bowl onto the
warming tray and adjust the temperature to the desired heat
The indicator light will turn ON and OFF while maintaining the
correct temperature.
• Please make sure the Warming Tray is not left on for more than
6-8 hours at any one time.
• Preheat the warming tray for 10 minutes prior to usage.
• Food warmed on the warming tray must be precooked or
already hot as this appliance is not designed for cooking,
heating from which are cold or frozen. Rather it is meant to
keep foods which are already hot or warm.
• When you have finished using the warming tray, unplug
from the power supply and allow the tray to cool down for
approximately 90 minutes before storing.
• MAKE SURE PLATES OR DISHES ON THE WARMING TRAY ARE
OVEN SAFE.
• DO NOT USE PLASTIC OR MELAMINE ON THE WARMING PLATE.