Use and Care Manual

ManualsBrandsMegaChef ManualsAppliancesDual Induction Cook-Top

- 6 -

INSPECT YOUR APPLIANCE

Examine the appliance for any visible damage prior to use. Do not use the

appliance if it appears damaged.

► If the power cord is damaged, do not use the appliance. You will need to

have it repaired by an authorized electrician.

► Persons who may not be able to safely operate the appliance due to any

physical,mental or motor disabilities may only use the appliance under the

direct supervision of a responsible person.

The items cooked on this appliance as well as the cooking utensils used and

the surface of the appliance can become very hot.

► Protect your hands during all work at the hot appliance by using heat insulating

gloves, dish cloths or similar.

► Do not place any metal cooking utensils, pot or pan lids, knives or other metal

objects on the cooktop. When the appliance is switched on, these items can

become very hot.

► Do not touch the hot surface of the ceramic cooktop.

► The induction cooker does not produce any heat during the cooking

process,but the residual heat of the cookware will heat up the surface.

Incorrect use of the appliance may create a danger of explosion due to heated

contents being pressurized.

► Never heat food or liquids in sealed containers such as cans. The container can

burst due to a high internal pressure. The contents of a can are best heated by

opening it and placing the contents in an appropriately sized pot or pan.

There is a risk of fire if the appliance is used incorrectly.

► During operation remove all easily inflammable items (e.g. detergents, aerosol

cans, cloths and towels, etc.) from the immediate vicinity of the appliance.

► Avoid overheating oils and fats for extended periods of time. Overheated oil and

fat can ignite rapidly.

► Do not place any or operate the cooktop with empty cookware. Do not heat

empty cookware on any burner.

UNDERSTANDING THE RISKS

When one burner

power level is set to :

The power level for the other

burner should be set to :

► When one burner works with 140-460F then the other one cannot work with

more than 180F

► When one burner works with 140-460F then the other one cannot work with

more than level 4.

1-3

1-4

1-5

1-6

1-7

1-8

1-9

1-10

1-11

1-12

- 13 -

The device can be turned off by pressing the ON/STANDBY control (1).

When the temperature is over 120ºF, an “H” will be displayed.

► Do not place any empty cookware on the induction fields. Heating an empty

pot or pan activates the overheating protection which will turn off the appliance.

► Do not operate the appliance if it is damaged in any way or does not function

properly.

►

► The use of accessories and spare parts is not recommended by the

manufacturer and may lead to damage of the appliance and injuries.

Press the Timer control (2) to set the timer.

Adjust the time to your liking using the +/- controls. The timer can be set by

1-minute increments (up to 180 minutes). Once the time is up, a beep will

indicate that the device is now in standby mode.

**Using the +/- controls while in Timer mode will not alter the temperature or

power level settings.

Powersharing allows you to use both burners simultaneously, by transferring

some of the power from one plate to the other. By doing so, one of the burner

will be more powerful, while the one sharing its energy will cycle down to a

lower temperature. The following chart illustrates how to use the power levels

on the Powersharing Mode.