Setup Notice

Indicator states
1. DecaMove OFF: LED is off
Dongle OFF: LED is off
2. DecaMove ON but not
connected to dongle:
LED is Orange
Dongle connected to PC but
not connected to DecaMove:
- LED is steady red (com port
open)
- LED blinks red (com port
closed)
3. DecaMove is turned on and
connected to dongle:
LED is blue
Dongle connected to PC and
DecaMove:
- LED is steady blue (com port
open)
- LED blinks blue (com port
closed)
4. DecaMove Battery Low/Charging:
LED is steady red
DecaMove Battery level extremely (<5%):
LED blinks red
5. DecaMove Charging complete:
LED is white
Button operation
1. Long Press button for more than 1 second to:
- Turn ON DecaMove if it is OFF or sleep mode
- Set DecaMove to sleep if it is ON
6. DecaMove Sleep mode:
DecaMove connected to dongle:- LED blinks blue
DecaMove disconnected from dongle:- LED blinks orange
2. Long Press button for more than 2 seconds to enter Device
Firmware Update mode, when usb cable is connected
Indicator states
3. Short press button (<500ms) to send button press indication to
host (PC):
- Single press - sends single click indication to host
- Double press - sends double click indication to host
- Triple press - sends triple click indication to host
7. DecaMove device identification:
When device identification command is sent to deca move,
LED will blink with whichever color that is on