Setup Notice

Problems and troublshooting
1. DecaMove is not connecting
- If the DecaMove dongle LED is solid red and the DecaMove LED is
solid yellow it means that the dongle BLE port memory wasn't clear
for some sort of reason (can happen with multiple DecaMoves in the
same environment).
Fix: Unplug the dongle, wait 3 seconds and plug it again.
- If the DecaMove dongle LED show solid blue and the DecaMove LED
is solid blue it means that the device is paired and either:
- It's not streaming quaternion data from some sort of reason: Fix -
Unplug the dongle, wait 3 seconds and plug it again.
- Or its SteamVR driver wasn?t loaded: Fix - Restart SteamVR
2. Game is not shown in the Decahub home
- If the DecaHub does not display a game, please click on the refresh
button in the DecaHub home tab
3. DecaMove is not working
- If the game was installed after you connected the dongle, please
remove the dongle and connect it again.
Advanced user?
If you find out that something is wrong, you can always check the log.
You should find the logs folder inside the installed folder (C:/Program
Files/Megadodo Games/DecaHub)
If you could zip that folder and send it to us, it would help a lot!.
You can also try and debug it yourself, open the log file and try to find
an error message such as ERR or FTL.
Brief technical data
DecaMove
- Transmitting/receiving frequency: 2.4GHz (BLE)
- Transmitting speed: 2Mb/s
- Working voltage: 3.7V (3.0V - 4.2V)
- Working current: 25 ~ 35mA
- Stanby current: <1mA
- Power off current: <2uA
- Transmitting distance: >5m (direct line of sight)
Dongle
- Transmitting/receiving frequency: 2.4GHz (BLE)
- Transmitting speed: 2Mb/s
- Working voltage: 5V
- Working current: 10 ~ 20mA
- Stanby current: <1mA
- Transmitting distance: >5m (direct line of sight)
FCC Caution:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set
forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.