User's Manual

IMPORTANT!

It is VERY IMPORTANT that enough slack is provided for crash and splash cymbals which move up

and down and that cable is not just hanging from the cymbal. This may cause jack failure, bend trig

ger housing, and cause intermittent triggering. When installing cable, bend cymbal to full extension

and attach cable to stand. (Fig. 2a,2b,2c)

Crash/Splash/China Cables

NOTE:

“Cutaway” ECYMBAL view is shown. Use the same guidelines for ALL HART ECYMBALS. All cables

feature one “straight” (-) jack and one “right angle jack” (L). Right angle connectors (NOT SHOWN)

are recommended for all trigger devices. Use the straight end for plugging into drum module.

Module Mounts

Attach all Yamaha and Roland modules using HW-URCL clamp and P-MT-TD10 mounting plate

(included).

HW-URCL P-MT-TD10

NOTE:

5pc. sets come with separate module mount tube and clamp. 6pc. sets use rack extension side tube

for module mount.

Ready To Play

You are now ready to “Power Up” your drum set. Locate the power supply (or power cord) and plug

connector into module back panel (where applicable). Plug other end into AC outlet. Press Power

button on front panel. Please refer to the appropriate Hart Recommended Module

Settings located

in this package and your Drum Module Owners Manual for information regarding trigger settings and

advanced trigger and programming features.

THE FOLLOWING PAGES IN THIS MANUAL INCLUDE:

Cable Diagrams

Module Settings

Lifetime Guarantee

Fig. 2a

CORRECT MOUNTING

NOTE CABLE RELIEF

Fig 2b

CYMBAL FLEXES

WITH NO

CABLE STRAIN

Fig 2c

INCORRECT:

INCONSISTENT TRIGGERING.

DAMAGED CYMBAL/CABLE