Operation Manual

Settings
16
Settings – Child lock
Your receiver is equipped with a child lock. This secures the receiver against unauthorised
use. When the child lock ist activated, the receiver can only be switched on after entering a 4-
digit PIN code.
Child lock – device lock
Use the VOL◄► buttons to switch the device lock on or fof. When the lock is activated, the
PIN code must be entered when switching on the receiver.
Press EXIT to leave the menu. Use the VOL◄► buttons to choose whether you want to store
the changes made (Yes) or keep the previous settings (No). Confirm your choice with the OK
button.
Child Lock – changing the PIN
The PIN code is set at the factory to 0000. Using the code 9976, the receiver can always be
switched on, regardless of what PIN code has been set.
Use the CH▲▼ buttons to move the cursor to the line New PIN and press the OK button. Use
the 0-9 buttons to enter a 4 digit PIN code, the press OK. Use the CH▼ button to move the
cursor to the line Confirm PIN and press the OK button. Now confirm your entry by entering
your chosen PIN code one more time, then press OK.
Press Exit to leave the menu. Use the VOL◄► buttons to choose whether you want to store
the changes made (Yes) or keep the previous settings (No). Confirm your choice with the OK
button.
WARNING
You must not forget the PIN code. Should this happen, please contact your specialist dealer!
In the Main menu, use the
CH▲▼ buttons to move the
cursor to the line Child lock and
press the OK button.
To activate or deactivate the
device lock, move the cursor to
the line Device lock and press
OK. The following menu will
appear:
To change the PIN code, move
the cursor to the line Change Pin
and press OK. The followin menu
will appear: