Operation Manual

Installation

Installation – Software download

With this function the operating software of the receiver, it´s menu texts and channel list can

be updated via Astra 19.2” (East). Nevertheless, your satellite antenna system must receive

this satellite. Your currently active channel list is not changed by a software update.

Attention:

- In case of a software update the current operating software will be erased and a new

software version will be installed.

- When updating the channel list the factory default channel list will be replaced by a new

one.

- When updating the OSD texts, all menu texts are erased and actualised.

The update process is subdivided into following steps:

1. Open Update Menu:

Enter the Installation menu, select line Software download and confirm with OK.

The Download menu for controlling the update process is opened and the search for the

download channel starts automatically.

Please wait until this search is completed. It may take a few minutes. When the download

stream is found the receiver verifies whether there are available new versions of the operating

software, OSD texts and channel list. The result is shown in the Download menu behind the

corresponding menu items (marked by µ).

If there are no new data available this is signalled by a „-“.

You can leave the download menu by EXIT.

Download

Software

Channel list

OSD texts

Information

Start download

new Software available

all

new Software available