Operation Manual

Timer
26
Timer – record timer
Use s t to select line Record timer in menu Timer and press OK.
The following menu appears:
Programming a record timer:
1. Select line Timer index (1...10) with st
2. There select timer place with ◄ ►
3. Select lines Start at , Stop time or date of recording with using st and confirm with OK
4. Enter the required time or date by pressing 0-9
5. Confirm your input with using OK
6. Select line Station with st and confirm with OK
7. Select a channel with st or
◄ ► and confirm with OK .
8. Select line Repetitions with st and use ◄ ► to specify the number of repetitions of
this record.
9. Select line Activate timer and activate the programmed record timer by pressing OK
there (text Activate timer changes to Deactivate timer).
The receiver will switch on at the programmed time and signals a timer record by displaying
“rEC.“ in the 4 digit LED Display. If you want to abort a record, please enter the record timer
menu and deactivate the timer by pressing the Deactivate button.
Hint: Please make sure that the local time of the receiver is set correctly and the video
recorder is programmed, too.
Record timer
Timer index (1...10)
Start at
Stop time
Date of recording
Station
Repetitions
1
00:00 o`clock
00:00 o`clock
21.09.05
7 ProSieben
nothing
TV List
1 Das Erste
2 ZDF
3 RTL Television
4 SAT.1
5 KABEL1
6 RTL2
7 ProSieben
Astra 19.2
Activate timer