Operation Manual

EPG – Electronic Programme Guide

Almost all TV and radio broadcasters provide further information on their programme. Your

receiver stores and decodes these data and displays them in the so called Electronic

Programme Guide (EPG).

This programme preview is activated by using the EPG button. The appearing list contains all

programmes of the current channel.

With s t or ◄ ► you can select the programme you want to be informed about. You can get

more detailed information by pressing OK.

Also you can use the EPG list to program a record timer very easily: Just press the yellow

button and activate the record timer in the corresponding menu.

Please use EXIT to leave this on screen dialog.

Audio settings

If a certain channel offers different audio options (e.g. languages)

these are displayed in the audio sub-menu of the channel change

on screen graphic.

With the red button on the remote control you can select the

desired option/language. Activate your choice by OK.

SPDIF – AC 3 mode (Option)

If a channel offers a digital audio sound (SPDIF/AC-3) this is

displayed in the audio sub-menu of the channel change graphic, too.

By using the red button on your remote

control you can select this AC-3 mode and activate it (OK).

If you own a HIFI amplifier and a digital Audio signal is broadcasted by the provider you can

enjoy this excellent sound. Therefore you have to connect the DIGITAL AUDIO port of the

receiver with the corresponding input port of your amplifier.

Using serial interface

The serial data interface offers you the possibility to connect the receiver to a PC. Therefore

you need a PC and serial cable with 1:1 pin assignment (i.e. all pins are connected directly).

Via this connection you can perform software updates and channel lists up- and downloads.

The required information and software tools are available at the manufacturer’s homepage.

[1/2]

German

English

[1/2]

German

AC-3