Operation Manual

Control elements, front and rear panels
6
Control elements, front and rear panels
Front panel
1 4-digit display (optionally) shows channel number
1a 2color LED shows ON/OFF status
DisplayLED
-red
Receiver in
standby mode.
ChannelgreenReceiver is ON
rEC. Timer activated
FAIL LNB short cut
Rear panel
2Connector for mains adapter 12VDC
3IF Input Digital – Connector for LNB
4 VCR-Scart port for connecting to the video recorder
5 TV-Scart port for connecting to the TV
9HDMI-Output for digital Audio and Video (optionally)
Left side
These connectors are optional. i.e. not all units have these connections. This depends on the
configuration options of the receiver.
6Optical Outputsocket for DOLBY DIGITAL-Signal.
7RJ-11-Socket: Connection for an Infraredmouse and Interface for softwareupdate
8RS232 interface for connecting to a PC in order to use further PC-based functions of
the receiver