Operation Manual

Initial installation

Satellite

In the last step please select the satellite whose channels

are to be sorted first in the channel list (use s or t ).

End the installation with OK.

A correction of the previous settings can be carried out

by pressing EXIT.

ATTENTION:

- If this installation is not finished (e. g. by power failure) or if the receiver is reset to

factory default status, the apparatus starts with the Welcome screen again.

- During summer time please adjust the time difference in menu „Receiver Setup“. It is

necessary for displaying the times, EPG, … correctly and avoiding mistakes at timer

records.

- If you use a DiSEqC-Switch in your reception system you may need to adjust the pre-

installed settings in menu Installation – LNB configuration. Following settings are pre-

installed:

DiSEqC Switch inputSatellite

AAstra 19.2° Ost

BHot Bird 13° Ost

CSirius 2/3 5° Ost

DAmos 1 4° West

Astra 19.2

Hot Bird

Turksat 1C

Sirius 2/3

Amos 1

Helas Sat 2

Welcome

Satellite